Rapid Multi-Layer System

 

The rapid multilayer system is a method of application to accomplish flooring with very high mechanical strength, with notable savings in the use of binder, extremely short execution times and rapid entry into service. Fast-curing binder with 100% solids is applied with a rubber trowel and then dusted with fine quartz aggregate (0.6 mm) between layers. This type of flooring is especially suitable for application in areas where high mechanical and chemical resistance is required, with enhanced anti-slip properties. System thickness varies according to the number of layers (recommended minimum of 3 mm).

Primer:

SEIREPOX IMPRIMACIÓN SNELL: Fast-curing, two-component Epoxy resin. Surface hardener, primer for continuous polymeric flooring. Good wetting and penetration power. Fast-curing, solvent free, 100% solids.

parking3 450

Intermediate and finishing Layer: 

SEIREPOX MULTICAPA SNELL: Two-component, coloured epoxy binder for rapid hardening and curing. Solvent free, 100% solids. For smooth or non-slip finishes, can be sprinkled with sand. High chemical and mechanical resistance. Indoor and outdoor use.

esquema multicapa rapido 450

 

DESCRIPTION

LAYER

MATERIAL

CONSUMPTION
Fast resin mortar with 1:4 resin-arid ratio 
Fine 0.3-0.6 mm silica sand

1

SEIREPOX IMPRIMACIÓN SNELL: 0.4 mm QUARTZ SAND
Mixing ratio 1:0.5
500-600 gr/m2

2

Dust to saturation with 0.6 mm quartz sand 3 Kg/m2

3

SEIREPOX IMPRIMACIÓN SNELL: 0.4 mm QUARTZ SAND
Mixing ratio 1:0.5
500-600 gr/m2

4

Dust to saturation with 0.6 mm quartz sand 4 Kg/m2

Epoxy Flooring Systems