Color Quartz System

 

The Cuarzocolor system is an application method derived from the multilayer system, used to generate aesthetically very colourful and mechanically resilient flooring, with remarkable savings in binder. Transparent binders are used with 100% solids, applied by rubber trowel, then dusted with fine quartz aggregate (0.6 mm) between layers and with coloured aggregate on the final layer(s). This type of flooring is especially suitable for application in areas where high mechanical and chemical resistance is required, with enhanced anti-slip properties and a decorative finish. System thickness varies according to the number of layers (recommended minimum of 3 mm).

Primer:

SEIREPOX TOP PLUStransparent epoxy binder with 100% solids for primer, intermediate layer, and sealant layers. High chemical and mechanical resistance.

cuarzocolor 450

Intermediate and finishing  Layer

SEIREPOX TOP PLUS: transparent epoxy binder with 100% solids for primer, intermediate layer, and sealant layers. High chemical and mechanical resistance.

esquema quartzcolor1 450

 

DESCRIPTION

LAYER

MATERIAL

CONSUMPTION
Resin Mortar with 1:4 resin-aggregate ratio
Coloured aggregate

1

SEIREPOX TOP PLUS : QUARTZ SAND
Mixing ratio 1:0.5
500-600 gr/m2

2

Dust to saturation with 0.6 mm quartz aggregate 3 -3,5 Kg/m2

3

SEIREPOX TOP PLUS : 0.4 mm QUARTZ SAND
Mixing ratio 1:0.5
500-600 gr/m2

4

Dust to saturation with coloured aggregate 4 Kg/m2

5

SEIREPOX TOP PLUS 300-350 gr/m2

Epoxy Flooring Systems