Conductive Self-Levelling System

 

Flooring developed for installation in sites requiring dissipation of electrostatic charge: electronic laboratories, operating theatres, warehouses storing inflammable material. Approximate thickness: 2mm.
Mixed using epoxy binders loaded with conductive particles, which are applied to a mesh of self-adhesive copper strips in a 3x3m grid, connected to an electrical earth (must be at least 2 earth connections and one connection every 100m2).
IMPORTANT: ensure that the entire mesh is properly connected to the earth and that the total area to be covered is connected to the earth without discontinuities in joints through the primer and copper mesh.

Primer:

SEIREPOX IMPRIMACIÓN: Two-component epoxy primer, solvent-fee, for continuous polymer flooring on dry and porous substrates.

 

Interlayer:

SEIREPOX IMPRIMACIÓN CONDUCTIVO: Two-component epoxy primer, solvent free, with electric conductive filler. Base coat for continuous conductive flooring.

sistema conductivo2 450

Finish

SEIREPOX AUTONIVELANTE CONDUCTIVO: Epoxy self-levelling coating, 100% solids. Conductive, formulated with special fillers to dissipate electricity. High chemical and mechanical resistance.

esquema AutoConductivo 450

 

DESCRIPTION

LAYER

MATERIAL

CONSUMPTION
Resin mortar with fine silica 
sand (0.2-0.4 mm)
Resin-aggregate ratio: 1: 0.3

1

SEIREPOX IMPRIMACIÓN1) 200-300 gr/m2

2

Mesh of copper strips, 3x3 m grid

3

SEIREPOX IMPRIMACIÓN CONDUCTIVO Max. 100 gr/m2

4

SEIREPOX AUTONIVELANTE CONDUCTIVO : SILICATE AGGREGATE (0,4 mm) 2,5 Kg/m2/1,5 mm (mix)

Epoxy Flooring Systems