Multi-Layer System

 

The multilayer system comprises a method of application which accomplishes flooring with high mechanical resistance and a notable saving in the consumption of binder. 100% solids binders are used, applied by rubber trowel, later dusted with fine quartz aggregate (0.6 mm) between layers. This type of flooring is particularly suitable for application in areas where high mechanical and chemical resistance is required, with high anti-slip properties. System thickness varies according to the number of layers, with a recommended minimum thickness of 3 mm

Primer:

Use a primer from the Seire range, according to the project’s requirements.

entrada8 450

Intermediate Layer and finish:

SEIREPOX MF: 100% solids epoxy coating. Multipurpose. Specially formulated for universal application (painting, multilayer or self-levelling). High chemical and mechanical resistance. Solvent-free. Low emissions.

SEIREPOX MULTICAPA: coating. High thickness. High physical and chemical resistance. Especially designed for use in multilayer technique.

esquema multicapa 450

 

DESCRIPTION

LAYER

MATERIAL

CONSUMPTION
Resin mortar with resin-aggregate 
ratio 1:4.
Aggregate of 0.3-0.6 mm 
fine silica sand.

1

SEIREPOX IMPRIMACIÓN1) : QUARTZ SAND 0,4 mm
Mixing ratio 1:0,4
400-500 gr/m2

2

Dust to saturation with 0.6 mm QUARTZ AGGREGATE 3 Kg/m2

3

SEIREPOX MF/SEIREPOX MULTICAPA2): 0,4 mm QUARTZ AGGREGATE
Mixing ratio 1:0.4
500-600 gr/m2Mixing

4

Dust to saturation with 0,6 mm QUARTZ AGGREGATE 3 Kg/m2

5

SEIREPOX MF/SEIREPOX MULTICAPA2): 500-600 gr/m2Mixing

Epoxy Flooring Systems