SEIREPOX AUTONIVELANTE CONDUCTIVO

SEIREPOX AUTONIVELANTE CONDUCTIVO is the topcoat of the conductive system.

A fluid, solvent-free, two-component epoxy mortar applied as a self-leveller; it enables execution of flooring which conducts/dissipates static electricity, with a smooth coloured finish, easy to clean, easy to maintain, waterproof and high mechanical and chemical performance .

The conductive / dissipative system requires the application of a primer of the type SEIREPOX IMPRIMACIÓN, SEIREPOX IMPRIMACIÓN SNELL, SEIREPOX IMPRIMACIÓN HUMEDAD, etc, to which an earthed copper frameis affixed. The following coat is done with SEIREPOX IMPRIMACIÓN CONDUCTIVO which is finally coated with the coloured layer of SEIREPOX AUTONIVELANTE CONDUCTIVO. Total thickness 2mm.

For details on execution of the complete system refer to the corresponding 

 

MIXING RATIO:

As indicated on packaging.

DENSITY:

Approx. 1,35 Kg/l

YIELD:

1:0.3 mixture with 0.4mm aggregate: 2.5kg/m2 per 1.5mm layer.

WORKABILITY TIME (20°C):

Approx. 35 min

LIGHT TRAFFIC (20ºC):

6 h

DRY TO TOUCH (20ºC):

1 day

FULL CURE (20°C):

7 days

RESISTANCE:

Mechanical strength after 24 hours. Chemical resistance after approx 7 days.

PACKAGING:

Kits de 20 Kg net

STORAGE:

Approx. 12 months in a dry place and in original unopened packaging.